HARMAN KARDON AVR110
Service Manual

AVR110

harman/kardon

Rear Panel Connections
¡ Tape Inputs: Connect these jacks to the PLAY/OUT jacks of an audio recorder. � Tape Outputs: Connect these jacks to the RECORD/INPUT jacks of an audio recorder. £ Video 1 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on a VCR or other video source. ¢ AM Antenna: Connect the AM loop antenna supplied with the receiver to these terminals. If an external AM antenna is used, make connections to the AM and GND terminals in accordance with the instructions supplied with the antenna. � Video 1 Audio Outputs: Connect these jacks to the RECORD/INPUT audio jacks on a VCR. § DVD Audio Inputs: Connect these jacks to the analog audio jacks on a DVD or other video source. ¶ FM Antenna: Connect the supplied indoor or an optional external FM antenna to this terminal. � CD Inputs: Connect these jacks to the output of a compact disc player or CD changer. ª Digital Audio Outputs: Connect these jacks to the matching digital input connector on a digital recorder such as a CD-R or MiniDisc recorder. � DVD Video Inputs: Connect these jacks to the composite or S-Video output jacks on a DVD or other video source. � Video Monitor Outputs: Connect this jack to the composite or S-Video input of a TV monitor or video projector to view the output of any standard video source selected by the receiver�s video switcher. ¤ Subwoofer Output: Connect this jack to the line-level input of a powered subwoofer. If an external subwoofer amplifier is used, connect this jack to the subwoofer amplifier input. � Front Speaker Outputs: Connect these outputs to the matching + and � terminals on your front left/right speakers. � Center Speaker Outputs: Connect these outputs to the matching + and � terminals on your center-channel speaker. � Surround Speaker Outputs: Connect these outputs to the matching + and � terminals on your left and right surround speakers. NOTE: When making speaker connections always make certain to maintain correct polarity by connecting the red (+) terminals on the AVR 110 to the red (+) terminals on the speakers and the black (�) terminals on the AVR 110 to the black (�) terminals on the speakers. See page 14 for more information on speaker polarity. � Switched AC Accessory Outlet: This outlet may be used to power any device you wish to have turned on when the AVR 110 is turned on with the System Power Control switch 2. � Unswitched AC Accessory Outlet: This outlet may be used to power any AC device. The power will remain on at this outlet regardless of whether the AVR 110 is on or off. NOTE: The total power consumption of all devices connected to the accessory outlets should not exceed 100 watts. ° AC Power Cord: Connect the AC plug to an unswitched AC wall output. · Remote IR Output: This connection permits the IR sensor in the receiver to serve other remote controlled devices. Connect this jack to the �IR IN� jack on Harman Kardon (or other compatible) equipment. a Remote IR Input: If the AVR 110�s front panel IR sensor is blocked due to cabinet doors or other obstructions, an external IR sensor may be used. Connect the output of the sensor to this jack. b Video 1 Video Outputs: Connect these jacks to the RECORD/INPUT composite or S-Video jack on a VCR. c Video 1 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on a VCR or other video source. d Video 3 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on a VCR or other video source. e Video 2 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on a VCR or other video source. f Video 2 Video Outputs: Connect these jacks to the RECORD/INPUT composite or S-Video jacks on a VCR. g Optical Digital Inputs: Connect the optical digital output from a DVD player, HDTV receiver, LD player or CD player to these jacks. The signal may be either a Dolby Digital signal, a DTS signal or a standard PCM digital source. h Coaxial Digital Inputs: Connect the coax digital output from a DVD player, HDTV receiver, LD player or CD player to these jacks. The signal may be either a Dolby Digital signal, DTS signal or a standard PCM digital source. Do not connect the RF digital output of an LD player to these jacks. i Video 2 Audio Outputs: Connect these jacks to the RECORD/INPUT audio jacks on a VCR or other video source. j Video 3 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on a VCR or other video source. k Video 2 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on a VCR or other video source.

10 REAR PANEL CONNECTIONS